Bearman Commends Ferrari's Comprehensive Support as Haas Navigates New Hybrid Engine Era
Oliver Bearman has expressed gratitude for Ferrari's collaborative approach in helping Haas maximize the performance of its newly supplied power unit. With 2026's revolutionary engine regulations placing unprecedented importance on electrical deployment and energy management, the Anglo-Danish driver credits the Scuderia's willingness to share technical knowledge as instrumental in the team's development.
As Formula 1 enters an era defined by substantially increased electrical components, the ability to effectively manage energy has emerged as a decisive factor in extracting competitive pace. This fundamental shift in the sport's technical landscape requires teams to master intricate calculations—determining the optimal moments to harness electrical power while simultaneously identifying when to employ lift-and-coast techniques to preserve battery capacity.
Oliver Bearman, piloting for Haas in the 2026 season, has highlighted Ferrari's exceptional willingness to assist his outfit in navigating these complex challenges. The driver has praised the Italian manufacturer's generosity in providing comprehensive technical guidance and strategic information to help Haas extract maximum performance from the Ferrari power unit now propelling their cars.
"Ferrari gives us as much info as they can," Bearman stated, underscoring the transparency and collaborative spirit demonstrated by the Maranello-based outfit. This partnership stands as a testament to Ferrari's commitment to supporting its customer teams during a period of significant technical transformation, ensuring that Haas has access to the knowledge necessary to compete effectively in this new regulatory framework.
Original source
Motorsport.com
Related Regulations
Hover over badges for quick summaries, or scroll down for full official text and simplified explanations.
Full Regulation Text
Article 2
Information provided by the PU Manufacturer to their customer F1 Teams
Chapter: APPENDIX C5: HOMOLOGATION AND DEVELOPMENT OF POWER UNITS, FUEL AND OIL FOR 2026-2030
In Simple Terms
Engine manufacturers must give F1 teams detailed plans and specifications of their power units in two stages: a preliminary version by August and a final version by November of the year before competition. If anything significant changes after August, the manufacturer must notify teams immediately, and if teams think the changes are unfair, they can ask the FIA to investigate within 7 days.
- Engine manufacturers must provide preliminary technical specifications and 3D models to teams by August 1st of the year before competition
- Final detailed specifications, operating parameters, and installation procedures must be submitted by November 1st
- Any significant changes after August 1st require immediate notification to customer teams and FIA approval
- Customer teams have 7 days to challenge unreasonable changes, with the FIA deciding within 14 days whether modifications are acceptable
Official FIA Text
Any PU Manufacturer intending to supply a Power Unit to an F1 Team during a Championship (year N) must: a. Declare to the FIA, before 1 August of year N-1, that they provided to their customer F1 Teams: i. An initial full external space model of the Power Unit including details and locations of all physical interfaces required by the team to install the Power Unit. ii. Preliminary estimates of important operating parameters such as heat rejection, fuel mass and density, clutch shaft stiffness and engine stiffness. b. Declare to the FIA, before 1 November of year N-1, that they provided to their customer F1 Teams: i. A final full external space model of the Power Unit including details and locations of all physical interfaces required by the team to install the Power Unit. ii. Firm predictions of important operating parameters such as heat rejection, fuel mass and density, clutch shaft stiffness and engine stiffness. iii. Initial details of any other parts, procedures, operating conditions and limits or any other information required by the team to install and operate the Power Unit as intended. After the 1 August of year N-1, any significant change compared to previous communication, must be notified to the customer F1 Teams in due time. Should a Customer Team consider that the change has an unreasonable impact on the Power Unit installation in the car, they may contact the FIA within 7 days of the notification. The FIA will then contact the relevant PU Manufacturer and its customer F1 Teams in order to conduct its investigation. If the FIA is satisfied, in its absolute discretion, that these changes are acceptable, the FIA will confirm to the PU Manufacturer and the customer F1 Teams within 14 days that they may be carried out.
Article 2.2
2026 Power Unit Regulations
Chapter: Chapter II - Power Unit Changes
In Simple Terms
2026 brings major engine rule changes. The complex MGU-H is removed to cut costs and attract new manufacturers. To compensate, the MGU-K becomes much more powerful and the battery is bigger. The goal is simpler, more sustainable power units that are still cutting-edge.
- MGU-H removed from power units
- MGU-K power increased significantly
- Larger energy store capacity
- Aims to attract new manufacturers
Official FIA Text
For 2026, the power unit will comprise a 1.6 litre V6 turbocharged internal combustion engine with a significantly enhanced electrical component. The MGU-H will be removed. The electrical power output will increase substantially with a more powerful MGU-K and larger energy store.
Article B7.2.1
Energy Deployment Limitations General Provisions & Principles
Chapter: B7
In Simple Terms
F1 cars have a limit on how much electrical power their hybrid energy recovery system (ERS-K) can use to help propel the car forward. The FIA tells all teams at least 4 weeks before each race what these power limits are, and teams must follow them exactly during the competition.
- ERS-K electrical power has absolute maximum limits set by F1 regulations
- The FIA announces specific power limitations for each race at least 4 weeks in advance
- All teams must comply with these limitations throughout the competition
- Power limit details are defined in Article C5.2.8 of the technical regulations
Official FIA Text
The absolute limits of electrical DC power of the ERS-K used to propel the Car are defined in Article C5.2.8. No less than four (4) weeks prior to a Competition, the FIA will provide all Competitors with information and limitations applicable to the Competition, which must be respected at all times.
Trending Articles
Formula 1 Confirms No Replacement Races Following Bahrain and Saudi Arabia Cancellations
about 5 hours ago
Live Betting During the Chinese Grand Prix: Your Guide to In-Play Wagering
about 6 hours ago
Damon Hill Returns to Broadcasting: Veteran Pundit Lands Fresh Platform Following Sky Sports Departure
about 6 hours ago
A Decade Since Murray Walker's Passing: Remembering F1's Greatest Voice
about 6 hours ago
Verstappen Narrowly Avoids FIA Scrutiny During Chinese Grand Prix Media Duties
about 6 hours ago