Ferrari Ready to Unveil Game-Changing Rotating Rear Wing at Shanghai Circuit
The Scuderia will showcase its groundbreaking rotating rear wing design during first practice at this weekend's Chinese Grand Prix, marking one of the season's most audacious technical developments. The innovative component, colloquially known as the "flip-flop" or "Macarena" wing, represents a significant departure from conventional aerodynamic philosophy in the 2026 Formula 1 campaign.
Ferrari is poised to introduce one of the most ambitious technical solutions of the 2026 Formula 1 season when it takes to the track in Shanghai this weekend. The Italian marque will field its revolutionary rotating rear wing during opening practice, with the unconventional design earning colorful nicknames among the paddock including the "flip-flop" and "Macarena" wing.
This cutting-edge aerodynamic device stands as a testament to the team's willingness to push boundaries and explore unorthodox engineering approaches. The debut of such a distinctive innovation at the Chinese Grand Prix signals Ferrari's determination to gain a competitive edge through pioneering development work during the 2026 season.
The component's distinctive rotating mechanism sets it apart from traditional fixed wing designs, potentially offering strategic advantages in managing downforce and drag across different track conditions and racing scenarios.
Original source
F1Technical
Related Regulations
Hover over badges for quick summaries, or scroll down for full official text and simplified explanations.
Full Regulation Text
Article B7.1.1
Driver Adjustable Bodywork General Principles
Chapter: B7
In Simple Terms
Drivers can adjust their front wing and rear wing flaps during the race to optimize performance. These adjustments are controlled by the car's computer and work differently depending on whether the car is going through corners (high angle, less adjustment allowed) or driving on straights (low angle, full adjustment available).
- Drivers can electronically adjust front wing profiles and rear wing flap angles during races
- Adjustments are controlled by the FIA Standard ECU (the car's control computer)
- Corner Mode limits adjustments when wings are at high incidence angles for better downforce
- Straight-Line Mode enables full adjustment when wings are at low incidence angles for better top speed
Official FIA Text
The permitted Driver Adjustable Bodywork includes adjustment of the incidence of the Front Wing Profiles and RW Flap controlled by the FIA Standard ECU. Deactivated when both systems are in Corner Mode high incidence positions. Fully activated when both are in Straight-Line Mode low incidence positions.
Article C3.11.1
Rear Wing Profiles
Chapter: C3
In Simple Terms
The rear wing must fit within a specific design area and can have up to three separate sections. It cannot have inward-curving surfaces visible from underneath, and any inward curves visible from above must have a minimum radius of 100mm to ensure safety and fair aerodynamic performance.
- Rear wing bodywork must stay within the defined RV-RW-PROFILES design box
- Maximum of three non-overlapping sections allowed in the rear wing structure
- No concave (inward-curving) surfaces allowed when viewed from below
- Any concave surfaces visible from above must have at least 100mm radius to prevent sharp curves
Official FIA Text
Rear Wing Profiles Bodywork must lie in its entirety within RV-RW-PROFILES, comprise of up to three non-intersecting simply connected volumes, and contain no concave radius of curvature visible from below and no concave radius less than 100mm visible from above.
Article C1.6
New systems or technologies
Chapter: ARTICLE C1: GENERAL PRINCIPLES
In Simple Terms
If a team invents a clever new system or technology that isn't explicitly mentioned in the rulebook but the FIA approves it, they can only use it for the rest of that season. Once the season ends, that innovation is no longer allowed unless it becomes an official part of the regulations.
- New technologies must be approved by the FIA before use
- Approved innovations are only permitted until the end of the season in which they're introduced
- Teams cannot carry over one-season innovations to the next season automatically
- The regulation prevents any team from gaining a permanent advantage from a loophole
Official FIA Text
Any new system, procedure or technology not specifically covered by these Technical Regulations, but which is deemed permissible by the FIA, will only be admitted until the end of the Championship during which it is introduced.
Trending Articles
Formula 1 Confirms No Replacement Races Following Bahrain and Saudi Arabia Cancellations
about 5 hours ago
Live Betting During the Chinese Grand Prix: Your Guide to In-Play Wagering
about 6 hours ago
Damon Hill Returns to Broadcasting: Veteran Pundit Lands Fresh Platform Following Sky Sports Departure
about 6 hours ago
A Decade Since Murray Walker's Passing: Remembering F1's Greatest Voice
about 6 hours ago
Verstappen Narrowly Avoids FIA Scrutiny During Chinese Grand Prix Media Duties
about 6 hours ago